Tortosa Area Forum - Steel sheeting for garage roof

Apr 18^th, 2024 at 4:46pm

Tortosa Area Forum › Help or Advice › Building, reforming, legalities etc › Steel sheeting for garage roof

(Moderators: Nigel, cactus jack)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Steel sheeting for garage roof (Read 4016 times)

briand6868 Full Member Offline Here, wishing I was there Posts: 207 Location: Coll de L'alba Joined: Mar 10^th, 2009 Gender:	Steel sheeting for garage roof Apr 8^th, 2013 at 9:27pm	Print Post
	Hola all, anyone know of a supplier of the above in the Tortosa area and a rough cost/size of sheet.The area I've to replace is 20 sq mtrs . Thanks Brian.


	IP Logged

Nobrot Ex Member	Re: Steel sheeting for garage roof Reply #1 - Apr 8^th, 2013 at 11:04pm	Print Post
	The steel stockholders at the back of sol d'ebre have them in all sorts of sizes. IIRC I paid about �40 / sheet for 6m x 1.1m.


	IP Logged

philmountains Senior Member Offline I love YaBB 1G - SP1! Posts: 460 Location: Skipton North Yorkshire Joined: Mar 25^th, 2005 Gender:	Re: Steel sheeting for garage roof Reply #2 - Apr 9^th, 2013 at 5:19am	Print Post
	Thats a really good price Ian ,I brought down 6X 3.4M sheets @ �25 a sheet from a stockist in Bury, I didn't know this stockist existed in Tortosa. Leroy Merlins wanted over 40 euros for 2.4 m sheets up in Tarragona.


	IP Logged

briand6868 Full Member Offline Here, wishing I was there Posts: 207 Location: Coll de L'alba Joined: Mar 10^th, 2009 Gender:	Re: Steel sheeting for garage roof Reply #3 - Apr 9^th, 2013 at 12:59pm	Print Post
	Nobrot, thanks for that, presume they also sell the self tapping screws/washers aswell or else I'll get them from a ferreteria.Hopefully this job will go okay and sort my leaky roof problem.


	IP Logged

Nobrot Ex Member	Re: Steel sheeting for garage roof Reply #4 - Apr 9^th, 2013 at 1:07pm	Print Post
	Update... 5m x 1.1m sheet �38.10 + iva. Dont know why but it is invoiced by the kilo not by the size !! They supply some really sexy self tappers already fiited with washers.A good rechargable drill or electric drill with clutch will have them in in seconds �10 for 200 Nice guys but no English.


	IP Logged

Nobrot Ex Member	Re: Steel sheeting for garage roof Reply #5 - Apr 9^th, 2013 at 1:13pm	Print Post
	Just to add.....there is a way to fit them properly and it's very subtle, so subtle in fact that even I missed it. Doesn't effect the roof just the appearance if you're really,really fussy. Look at the leading edges carefully and you'll see.


	IP Logged

briand6868 Full Member Offline Here, wishing I was there Posts: 207 Location: Coll de L'alba Joined: Mar 10^th, 2009 Gender:	Re: Steel sheeting for garage roof Reply #6 - Apr 9^th, 2013 at 11:14pm	Print Post
	Is it the "small lip" - "big lip" thing (and no guffaws from the cheap seats), someone told me to make sure and lay the big lip over the small one.


	IP Logged

Nobrot Ex Member	Re: Steel sheeting for garage roof Reply #7 - Apr 10^th, 2013 at 9:28am	Print Post
	Yes,it's the small ridge on one side that runs the complete lenght.If it's not laid down the right way the next matching edge will stand slightly proud.Not detremental but by the time the you realise it it's too late.


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board ^Top

Tortosa Area Forum » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge